 |
Race 6 Anti Sub
Strap
MODEL/PART#
T 79000-0 :BLACK COLOR
T 79000-H2 :GREEN COLOR
Replacement or Additional Anti-Sub Straps for your TAKATA
Race 6 harnesses or 6-pt Upgrade for Race 4 - T-Bar
Sub-Strap - FIA Homologated. Snap-on w/eye bolts.
Available in Black or Green.
MSRP $ |
 |
 |
 |
Tow Strap
MODEL/PART#
T 78009-0 :BLACK COLOR
T 78009-H2 :GREEN COLOR
Tow straps for your race car. Available in green and black,
with TAKATA Logo embroidered.
With bendable stainless steel bolt-on hardware for up to
7/16" or max 12 mm bolt; capable of pulling over 1800 kg
(4000 lbs)
Special order product.
MSRP $ |
 |
 |
 |
Comfort Pads 3
Inch
MODEL/PART#
T 78008-0 :BLACK COLOR
T 78008-H2 :GREEN COLOR
One pair of 3-inch shoulder pads to be used with any 3"
shoulder belt from TAKATA. Very soft and luxurious fabric on
the outside, filled with foam for ultimate comfort. Extra
padding protects below the shoulder belt adjuster.
Zipper down one edge for easy installation.
MSRP $ |
 |
 |
 |
Comfort Pads 2
Inch
MODEL/PART#
T 78011-0 :BLACK COLOR
T 78011-H2 :GREEN COLOR
One pair of 2-inch shoulder pads to be used either with
factory 3 point harnesses, or 2" shoulder webbing on a Drift
II. Very soft and luxurious fabric on the outside, filled
with Confor foam for ultimate comfort.
Zipper down one edge for easy installation.
MSRP $ |
 |
 |
 |
Keychain
MODEL/PART#
T 990209
Takata branded keychain, with "Go For Green" on reverse.
Embroidered.
Special order product.
MSRP $ |
 |
 |
 |
Bendable bracket
kit for Snap-On
MODEL/PART# T 01324
This kit is to be used in conjunction with the Snap-On end
fittings on Takata Harnesses. Use this bracket to bolt into
a hard to reach place in your car, then snap the harness on
to it.
Brackets are designed to be bent up to 90° in either
direction. Do not bend back and forth repeatedly, as this
will weaken the metal and could result in unsafe conditions.
(2) B23A Bendable Snap-On Rings, (2) 7/16" Bolts, (2)
Washers
MSRP $ |
 |
 |
Snap-On Kit
MODEL/PART# T 01312
(2) B23A Bendable Snap-On Rings, (2) 7/16" Bolts, (2)
Washers
MSRP $ |
 |
 |
Reinforcement
plate
MODEL/PART# T SG39
Plate: 80 mm x 50 mm x 3 mm w/welded 7/16" nut. Use with
Eye-bolts and/or 7/16" Bolt-In hardware
MSRP $ |
 |
 |
Eye-bolt 7/16"
-22mm
MODEL/PART# T SG23
7/16" for snap-hook attachment, 22 mm long
MSRP $ |
 |
 |
Eye-bolt 7/16"
-38mm
MODEL/PART# T SG22
7/16" for snap-hook attachment, 38 mm long
MSRP $ |
 |
 |
Bolt 7/16" 25mm
long
MODEL/PART# T SG10
7/16" for bolt on attachment, 25mm long
MSRP $ |
 |
 |
Shoulder bolt
7/16" 25mm long
MODEL/PART# T SG11
7/16" Shoulder bolt for B24 bracket ONLY, 25mm long
MSRP $ |
 |
 |
Bolt-On Bracket -
Solid
MODEL/PART# T B24.15.13
for 50mm (2") webbing or 75mm (3") webbing (folded), 15
degree bend, 1/2" hole (can be spaced down to 7/16",
3/8"-M10, or 5/16"-M8)
MSRP $ |
 |
 |
Wavy Washer
MODEL/PART# T S3
Wavy Washer for 7/16" bolt
MSRP $ |
 |
 |
Wrapping hardware
2-bar- slide
MODEL/PART# T LV 4
for 50 mm (2") webbing
MSRP $ |
 |
 |
Wrapping hardware
3-bar- slide
MODEL/PART# T LV 10.A
for 50 mm (2") webbing
MSRP $ |
 |
 |
Wrapping hardware
3-bar- slide
MODEL/PART# T LV 7
for 75 mm (3") webbing
MSRP $ |
 |